How is a foldable tent set up?

Set up your foldable table in 1 minute

A foldable table has 4 major advantages that make it the customers’ preferred pop-up tent on the market:

1) When it is collapsed, it takes up no space and can be easily transported around.

2) It can be set up in 1 minute and requires no assembly instructions, and you don’t need to be 2 people to do it (but it’s easier).

3) A sturdy frame and a water-resistant canopy make the tent usable both indoors and outdoors, even in bad weather.

4) Easy profiling of your business. Get printing done on your frieze, canopy, or side.

1 person can set up a foldable table

Start by unpacking your foldable table tent and placing it on its feet as shown in the pictures below. If the canopy is not already attached, do this now (only the first time); you can spread it out a bit to make it easier to distribute the canopy over the frame.

Remember to secure the Velcro around the legs and the cord is placed around the center pole of the frame, so the canopy sits straight when the tent is raised.

If there are two people, they stand at each end of the tent and hold onto the lower, middle poles and walk backwards. If there is only one person, they first pull out one side and the corner, and then do the same at the opposite end.

When the frame is fully extended on the sides and has locked into place on the legs, it is time to raise it up. Here, hold onto the pins on each leg, gripping the lower part of the leg while lifting the frame until one side is raised.

Raise the other side now and the tent stands as you wish it. After that, the height can easily be adjusted by adjusting the leg height. Make sure to check the velcro closures so the roof cover is completely secure.

At Zederkof, you will also find a large accessory program for foldable tents including sides, weight stabilizers, weights, pegs, gutters, and guy lines.

If you have any other questions, you are always welcome to contact us at info@zedekrof.com or tel. 89 12 12 00.